INCREASE THE POWER OF YOUR BIKE IN SIMPLE STEPS

First of all, the thing you have to do is to examine the engine of your bike: check for the leaks whether the seal is broken or not. If the seal was broken replace it with new one and then proceed further, and make sure that seal will not break in future. For the replacement of engine seal contact the best mechanic you know.

After this, check the condition  of spark plug. If the pin of sparking plug is black, change the plug immediately, and I will recommend to  use original NGK iridium plug for better performance and fuel-efficiency. The sparking plug plays an important role in the performance of bike, if your plug is healthy the bike will produce more power.
Also change the coil, use the coil which give more current than ordinary one, to the plug.
You can buy the iridium plug from this link.
https://www.alibaba.com/premium/ngk_spark_plugs.html?src=sem_ggl&cmpgn=897160539&adgrp=44432642283&fditm=&tgt=kwd-350616553087&locintrst=&locphyscl=1011077&mtchtyp=b&ntwrk=g&device=c&dvcmdl=&creative=210128753907&plcmnt=&plcmntcat=&p1=&p2=&aceid=&position=1t1&gclid=CjwKCAjw64bPBRApEiwAJhG-fkYJJjNscCdKl2K2JQ7c3IyZ6ocQpq2_IFoONT-6rMgon9cNUbEaKhoCIfkQAvD_BwE

 Modify the air intake your bike to increase its power. Air intake also plays an important role. The more air goes in, the more power comes out from engine. Air must go inside the engine in purified form, no dust particle should go inside the engine, as this is hazard to the health of engine.

I recommend to use fuel filters to purify the petrol from particles, sometimes the fuel tank is rusty, its rust particle goes inside the cylinder chamber, which is also hazard to the engine.

There are the two components which are used to deliver power from engine to back wheels: chain and gears.
Check the gear which is directly attached to the driving shaft. These gears become weak and thin due to the friction between chain and gears. If the gear need replacement, replace it on right time, don't wait for the last time. Use high quality gears. Use grease to minimize the impact of friction, this will increase the life of gears and chain. I recommend you to change the gears every month, to maintain the performance and health of engine and gears, respectively.

Chain System

This is my first blog on how to increase the power of your bike.
Hope you people like my blog,
If you want me to write a blog on another topic,  just comment below,
I will write it for you in more detail.
And make sure, you have hit the follow button

For any mistake and missing information, you have right to comment below about it


Good bye
Have a nice day